Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Medina
If your Medina home has a second-floor zone that never heats evenly, or a faint musty smell you can’t place, the ductwork is usually where the answer lives. We handle duct repair and sealing for Medina homeowners and property managers, from single-system homes to estates running two or three furnaces. We know the area well, we know how these large custom houses are put together, and we know what the damp Puget Sound air does to runs near a crawlspace. The estimate is free and the price is set per job by the written estimate before any work starts. Call (833) 736-3635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Medina Homeowners Call Air Duct Cleaning Queen Anne for Duct Repair & Sealing
Medina is one of the wealthiest small towns in Washington, a bridge-linked enclave of waterfront and near-waterfront estates on Lake Washington. That shapes the work. Duct service here is less about dusty tract homes and more about large, high-ceilinged custom houses with multiple HVAC zones, sophisticated filtration and whole-house systems. Homeowners and their property managers expect discreet, appointment-based service and documentation rather than a quick visit with a shop vacuum.
We earn the call because the process is verifiable. We work under negative pressure with Abatement Technologies air filtration on site, the same category of equipment used in professional remediation environments. The local pro we connect you with is licensed and insured as their state requires. Our technicians have up to 11 years of experience, and they can tell the difference between a duct that needs a new taped joint and a duct that needs a new run.
Response to Medina is quick. We’re just across the water from Queen Anne, so Madison Park and the Highway 520 approach are a straightforward run, and we plan appointments around your schedule rather than squeezing a house in at the end of a route. Before-and-after photos of your own ducts go home with you, which matters when most of this work happens inside framing you’ll never see again.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Medina
Our duct repair & sealing work covers the full system: sealing the leaks, repairing what’s broken, and insulating runs that sweat. Here’s what each piece looks like in a Medina house.
Duct Sealing
Sealing is the core of what we do here. In a Medina home with two or three furnaces, sealing gets quoted per system, not as one lump job. A three-system house is effectively three sealing scopes, each with its own air handler, supply and return ducts, and its own leak map. Seal one zone and skip another, and the uneven-heating complaint comes right back.

Duct Insulation
Ducts in Medina face months of damp air, near-lake humidity, and closed-up winters. Uninsulated runs near crawlspaces and exterior walls are where condensation forms and musty odors start. We insulate those runs so the cold surface never meets the warm, wet air in the first place, then check the joints for moisture damage before sealing over them.

Mastic Sealant
Old cloth-backed tape and dried mastic get removed, not painted over. That matters in Medina because joints in damp crawlspace runs and near-lake runs fail again within a season if they’re sealed on top of the old material. Mastic goes on the clean joint, and it holds. Bypass leaks at filter housings get the same treatment.

Flex Duct Repair and Metal Duct Repair
Flex runs near a crawlspace or exterior wall are where damp air pulls taped seams apart, and metal trunk lines in 1980s builds often have loose takeoffs and panned returns that never sealed right to begin with. We repair both. Where a run is crushed, kinked, or disconnected inside a tight chase, we trace it with a camera first so the repair happens in the right place.
Trusted Brands We Service in Medina
We work with the names that show up in high-end Medina homes. That includes Honeywell and Aprilaire air quality equipment, Abatement Technologies filtration, and Guardsman components. When a house carries a builder-grade filter housing alongside an HRV or ERV setup, we can identify what’s actually installed and what the owner believes is installed, which are sometimes two different things. We don’t claim to stock parts on a truck. We diagnose the equipment on site and source what the repair needs, so the sealing and repair work doesn’t undo a filtration upgrade you’ve already paid for.

See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Medina Homes
- One flat quote on a multi-furnace house. A three-furnace Medina estate gets priced as a single job, one zone’s leaks go unaddressed, and the uneven-heating complaint persists. Per-system scoping fixes that.
- Sealing over old tape and dried mastic. Cloth-backed tape and dried mastic in damp crawlspace and near-lake runs fail again within a season if new sealant goes on top of them. The old material has to come off first.
- Builder-grade filtration passed off as hospital-grade. Owners believe a high-MERV media filter was installed when a low-MERV housing is still in place, and bypass leaks around it quietly pull unfiltered air into the supply.
- Condensation in uninsulated flex near crawlspaces and exterior walls. In a peninsula house sealed up through the rainy season, cold flex runs sweat, microbial growth follows, and the ducts smell musty rather than simply dusty.
Pricing for Duct Repair & Sealing in Medina, WA
Duct sealing in Medina is priced per system, not per house and not per vent. Here are typical estimates for the Medina market:
- Duct sealing, single system: typically $600 to $1,400
- Duct sealing, each additional system in the same home: typically $450 to $1,100
- Flex duct repair or replacement, per run: typically $180 to $450
- Metal duct repair, per section: typically $250 to $600
- Duct insulation, per run: typically $200 to $500
- Mastic re-sealing of a filter housing or plenum: typically $150 to $350
What moves the number: number of systems, how much of the ductwork sits in a crawlspace or behind finished walls, whether old tape has to be removed, and how many leak points the camera finds. The written estimate sets the final price. Estimates are free, and each system gets its own line so you can see where the money goes.
We Also Serve Cities Near Medina
We serve Medina and the surrounding eastside and Seattle neighborhoods, including Madison Park, Capitol Hill, Laurelhurst, and Maple Leaf. The same per-system approach and documentation goes with us across the water.
Serving Medina, WA – Our Local Coverage Area
We serve Medina and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Medina
It should be three separate scopes, priced per system, each with its own air handler, supply and return ducts, and leak map. A single lump price for a three-furnace Medina home is a red flag, because one zone’s leaks inevitably get skipped and the uneven heating remains. Ask to see each system broken out on the written estimate. Call (833) 736-3635 for an exact quote. Estimates are free.
Because the problem is moisture, not dust. Homes near Lake Washington stay sealed up through the long rainy season, and uninsulated flex runs near crawlspaces and exterior walls gather condensation. That damp surface grows microbial growth, and the smell follows. Cleaning alone won’t fix it. The run needs insulation and a sealed joint. Call (833) 736-3635 to get the source traced.
You should get before-and-after photos of your own ducts, a leak map for each system, and a written scope naming what was removed, repaired, and resealed at each joint. That’s the standard we hold to in Medina, where most of the work happens inside framing you’ll never open again. Documentation is not optional here. Call (833) 736-3635 and ask what the report will include.
Yes, when the work is planned around the equipment. Honeywell and Aprilaire filtration and HRV/ERV systems are common in larger Medina homes, and the sealing work has to account for them rather than work around them blindly. A qualified pro isolates each system and works under negative pressure with HEPA filtration so the air quality gear isn’t compromised. Call (833) 736-3635 to talk through your setup.
Usually yes, and it’s the right order. Seal first so the upgraded filtration isn’t pulling unfiltered air in through bypass leaks and open joints. Otherwise you pay for a high-MERV filter that never sees all the air it’s meant to clean. Sealing in a 1980s Medina home is often the cheaper half of the job and the one that actually holds the improvement. Call (833) 736-3635 for a free estimate.
If your Medina home has zones that heat unevenly, a musty smell near the crawlspace, or filtration equipment you’re not sure is actually working, the fix starts with a camera inspection and a per-system plan. We clean it, seal it, and document it, so you can see what changed inside runs you’ll never open again. Call (833) 736-3635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Queen Anne.