Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Queen Anne?
Duct repair and sealing in Queen Anne typically costs $450 to $2,400, with most single-family homes landing between $650 and $1,400 for sealing and repairing the accessible sections of a forced-air system. Small fixes like reconnecting a single joint or sealing a short run of leaking flex duct run $450 to $700, while full-house sealing with duct replacement on badly failed sections climbs toward $2,400. The written estimate sets your final price, and it’s free.
What’s in your ducts is what’s in your air, and leaks are the reason it gets back in. A supply run that has pulled loose behind a wall or a return chase that was never sealed pushes conditioned air into the attic or crawlspace and pulls unfiltered air back into the living space. Sealing and repairing the system is how that loop gets closed, and it’s the step most cleaning-only visits skip.
If you’re calling because allergies have gotten worse, because a remodel filled the system with drywall dust, or because a home inspection flagged leaky ducts, we can help you sort out what actually needs to happen. Call (833) 736-3635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical range in Queen Anne: $450 to $2,400 for repair and sealing, most homes $650 to $1,400.
- Sealing alone on an accessible system usually runs less than replacing failed duct sections.
- Older Queen Anne homes with uninsulated or buried duct runs tend to cost more to correct.
- We clean it, seal it, and treat it – one call covers the full system.
- Estimates are free and the written estimate sets the price.
Duct Repair & Sealing Cost Breakdown (2026)
The numbers below are typical estimated ranges for the Queen Anne market in 2026. Your written estimate is the binding number, and it can land outside these ranges when the system turns out to be worse than it looked from the register side.
| Line item | Typical estimated range |
|---|---|
| Reconnect a single loose joint or boot | $450 – $700 |
| Seal accessible supply and return runs (mastic and foil tape) | $650 – $1,200 |
| Seal and repair a full forced-air system, most homes | $900 – $1,400 |
| Replace failed flex duct section (per run, labor included) | $180 – $400 |
| Rigid metal duct section replacement | $350 – $750 |
| Return chase sealing where reachable | $400 – $900 |
| Full-house sealing with multiple section replacements | $1,400 – $2,400 |
| Duct cleaning paired with the repair visit | $350 – $600 additional |
Where the cost moves is mostly in access. A leaking joint in an open basement is a fast fix. The same joint behind a finished ceiling or buried under blown insulation in a crawlspace is a different afternoon. Duct replacement drives price up more than sealing because material and labor both climb. And when a system hasn’t been touched since the house was built, we often find several problems sharing one cause: undersized returns, crushed flex runs under flooring, or tape that failed years ago and left gaps wide open.
What Affects Duct Repair & Sealing Pricing in Queen Anne
- Age and construction of the home. Queen Anne has a deep stock of older houses, and plenty of them still carry original ductwork or one retrofitted forced-air system added in later. Older systems usually mean older tape, brittle flex, and fittings that no longer join cleanly, all of which add labor.
- Duct location and access. Runs in a vented crawlspace or a tight attic are slower to reach than a clean basement header. Access affects labor, and labor is the biggest line in any estimate.
- Duct material and condition. Flex duct is cheap to replace and easy to run. Rigid metal holds up longer but costs more per section. A system with crushed or torn flex in several places is a repair-heavy job.
- Number of registers and runs. More supply and return runs mean more joints to inspect, seal, and test. A small home with six registers prices very differently from a larger house with fifteen.
- Whether cleaning comes first. Sealing over a dirty system traps debris and defeats the point. We usually recommend cleaning before sealing so the repair holds on a clean surface. That’s why we clean it, seal it, and treat it in the right order rather than mixing the steps.
- Pressing seasonal extremes. Western Washington swings between damp, cool stretches and warm summer afternoons. Leaky ducts lose conditioned air in both directions, and homes with older, poorly insulated runs feel it first on the hottest days and the coldest ones. That’s a comfort problem and an energy problem at once.
Why Duct Repair & Sealing Costs What It Does
Duct repair is diagnostic work as much as it is manual work. A leaking system doesn’t always announce itself. Sometimes the symptom shows up as a room that never gets warm, sometimes as a dust film that returns a week after cleaning, and sometimes as a utility bill that has quietly crept upward. Finding the actual source takes time with a system map, a look at the accessible runs, and a check of how the returns are pulling. That diagnostic step is baked into the estimate rather than billed separately.
Then comes the repair itself. Sealing a joint properly means cleaning the surface first, applying mastic or foil tape that will hold, and checking the connection actually pulls tight. A quick tape wrap over dust fails within a season. Replacing a torn flex run means pulling the old one, sizing the new one to the register, and supporting it so it doesn’t sag and restrict flow. None of that is exotic, but it’s careful work and it takes time.
We approach it from the equipment side too. We use professional-grade extraction systems, Rotobrush and Nikro, built specifically for ductwork rather than adapted shop vacuums. On jobs where debris and contamination are heavy, Abatement Technologies air filtration runs on-site during the work, which is the same category of equipment used in professional remediation environments. That setup is why a repair visit can be handled cleanly instead of stirring dust into the home.
Duct repair and sealing is one of our five core services, alongside air duct cleaning and the rest of the full system. If you want to see how the repair side fits with everything else, the duct repair & sealing page lays out the process. One call covers the full system, so you’re not coordinating a separate cleaner, a separate repair contractor, and a separate air quality visit.
Is It Cheaper to Repair Your Ducts or Replace Them?
Repair is almost always cheaper than replacement, and in most Queen Anne homes it’s the right call. Sealing and repairing failed sections typically costs $450 to $2,400, while replacing an entire duct system can run several times that. Replacement only makes sense when the system is undersized, badly designed, or failing in so many places that repair cost approaches the replacement cost.
The sensible way to decide is to have the system looked at before committing to either. A repair estimate is free, and it will tell you whether you’re looking at a few failed joints or a system that has aged out. Call (833) 736-3635 for that estimate.
How to Save on Duct Repair & Sealing
You don’t need a promotion to keep the bill down. A few practical moves make a real difference.
- Fix leaks before they spread. A joint that’s starting to separate is a small repair. The same joint after a season of pulling apart can take a section of duct with it.
- Bundle the work into one visit. If the ducts need cleaning and the dryer vent needs clearing, having it done on the same visit saves on labor and scheduling. We offer dryer vent cleaning as a standalone service and as part of a full-system appointment.
- Get the whole system inspected, not just the register you’re worried about. Leaks hide. A single visible problem often sits next to two or three others.
- Ask for the estimate in writing before work starts. Ours is free, and the written number is what you pay.
- Address the source, not just the symptom. Recurring dust or a room that won’t heat is usually a duct problem, not a filter problem. Sealing the leak stops the cycle.
If you’re comparing bids, ask each one what equipment they’ll run and whether sealing is part of the scope. A cleaning-only quote that leaves the leaks in place will leave you with the same problem in a few months. To get a free estimate on your system, call (833) 736-3635.
What’s Included in a Duct Repair & Sealing Visit?
A repair visit starts with an assessment: mapping the system, checking accessible supply and return runs, and identifying where air is escaping or entering. From there it’s diagnosis, repair, sealing, and a check that the connections hold. When cleaning is part of the scope, it comes first so sealing goes onto a clean surface.
We also work with Aprilaire and Honeywell air quality products. When the repair is done and the system is tight, those are the parts that extend the work into filtration and long-term indoor air quality rather than stopping at a good seal. That matters for households where allergies, a recent renovation, or a new-home purchase brought the ductwork to attention in the first place.
Our technicians have up to 11 years of experience, and the local pro we connect you with is licensed and insured as their state requires. If you want the full picture of what we handle across the home, the main service covers cleaning, dryer vent, HVAC, repair and sealing, and sanitizing as the five categories under one roof.
Do You Need Duct Repair or Just Cleaning?
If the ducts are dirty but tight, cleaning is the answer. If air is escaping or getting in through gaps, cleaning alone won’t fix it. Signs you’re looking at a repair problem: rooms that never reach the thermostat setting, a dust film that returns within days of cleaning, visible gaps at joints or boots, flex duct that’s crushed or torn, or a system that whistles and pulls hard at the returns.
When we find real leaks during a cleaning visit, we’ll show you what we found and quote the repair separately. Estimates are always free and there’s no pressure to add work on the spot. Call (833) 736-3635 if you’d like an assessment.
FAQs – Duct Repair & Sealing Cost
How much does duct repair and sealing cost in Queen Anne?
Duct repair and sealing in Queen Anne typically costs $450 to $2,400, with most single-family homes falling in the $650 to $1,400 range for sealing and repairing accessible runs. Small joint and boot repairs run $450 to $700. The written estimate sets your final price. Call (833) 736-3635 for a free estimate.
Is it cheaper to repair or replace ductwork?
Repair is almost always cheaper. Sealing and repairing failed sections runs $450 to $2,400, while full replacement costs several times that. Replacement makes sense only when the system is badly designed, undersized, or failing in so many places that the repair cost approaches replacement. A free estimate will tell you which side of that line you’re on. Call (833) 736-3635.
Can you come today?
Same-day service is often possible. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 736-3635 and we’ll get you booked. The estimate itself is free.
How much does it cost to fix a leaking air duct in Queen Anne?
Fixing a single leaking duct joint or boot typically costs $350 to $700 in Queen Anne, depending on access. Leaks behind a finished ceiling or buried in a crawlspace run higher. Sealing a broader set of runs on the same visit costs more but addresses every leak the technician can reach. Call (833) 736-3635 – estimates are free.
Why are my ducts leaking in the first place?
Most leaks come down to failed connections: mastic that cracked, cheap foil tape that dried out, flex duct that got crushed or pulled loose, or fittings that never joined tightly to begin with. In Queen Anne’s older homes, ductwork that’s been in place for decades is a common cause. Persistent dust, cold rooms, and rising bills are the signs to watch for. If you’re seeing them, call (833) 736-3635 for a free estimate.
Book a Free Duct Repair Estimate in Queen Anne
Leaking ducts waste conditioned air, pull unfiltered air back into your home, and make it harder to keep rooms comfortable no matter what the thermostat says. We handle cleaning, sealing, and sanitizing as one process, with professional extraction equipment and on-site air filtration so the work is done cleanly. If you’d rather not guess what your system needs, call (833) 736-3635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the price is set per job in writing, and you’ll know exactly what you’re paying before any work starts.
Written by the team at Air Duct Cleaning Queen Anne.
Pricing reflects the Queen Anne market as of 2026. Air Duct Cleaning Queen Anne offers free estimates – call (833) 736-3635.
What Our Customers Say
"Ran a negative air machine on the whole system rather than the shop vac on a stick that the cheap outfit down the road uses. Showed me the before and after photos from inside the trunk line and it was genuinely disgusting."
- Megan Hayes"Did the dryer vent while they were here for a small add on price. The dryer now finishes a load in one cycle instead of two."
- Tracy Schaefer"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Hector Guzman