Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across View Ridge
If you live in a View Ridge ranch or split-level, there’s a good chance the ductwork above your ceiling and under your floor is older than most of the people reading this page. That’s our starting point on every View Ridge job: figure out what’s actually there before we touch a single joint. We serve View Ridge with duct repair and sealing built around postwar homes, original galvanized metal, and the retrofit mess that comes with seventy years of furnace swaps. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 736-3635 for a free estimate.

Why View Ridge Homeowners Call Air Duct Cleaning Queen Anne for Duct Repair & Sealing
View Ridge is a neighborhood where the housing stock tells you most of what you need to know. The streets off Sand Point Way and up toward the View Ridge Playfield are lined with 1940s to 1960s single-family homes, and many still run the original rigid galvanized sheet-metal ductwork installed when the houses went up. That’s not a sales pitch. It’s a diagnostic fact, and it changes how we approach the work.
We’ve built a reputation in View Ridge on one thing: we map the system before we quote it. Homeowners here have usually already gotten a vague number from someone who never opened a crawlspace hatch. We don’t do that. Our technicians have up to 11 years of experience, and they work with professional-grade Rotobrush and Nikro extraction systems and Abatement Technologies filtration, equipment built for this trade rather than borrowed from another one. What we find on a View Ridge job is often the same story: a furnace replacement from some point in the last few decades tied new flex runs into the original metal trunk without re-permitting, proper sizing, or sealing. The result is a patchwork. A duct-map is the first step, and it’s why our estimates hold up.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in View Ridge
Three sub-services carry most of the work on these older View Ridge homes, plus insulation where the runs cross a cold crawlspace. Here’s what each one actually involves.
Duct Sealing
Sealing is often the real fix in a View Ridge house, not cleaning. Decades of expansion, settling, and furnace swaps open up joints that leak conditioned air into crawlspaces and pull damp outside air back into the supply stream. We seal accessible joints with mastic and mesh, then verify the system holds before we call it done. If you’ve noticed rooms that never quite warm up, sealing is the place to start.

Metal Duct Repair
Original galvanized ducts in View Ridge develop interior rust and pinhole leaks from years of condensation in basements and crawlspaces. We repair the metal itself: patching pinholes, resecuring loose sections, and replacing crushed branches where an addition or remodel pinched them shut. This is the work that keeps a 1950s trunk line usable instead of sending it to the landfill.

Flex Duct Repair
Flex duct shows up in almost every View Ridge home, added during a remodel or furnace upgrade. It gets crushed behind drywall, kinked at sharp turns, and disconnected in crawlspaces, cutting airflow to far rooms and trapping debris in the low spots. We trace the runs, reconnect what’s come loose, and replace the sections that are beyond saving.

Duct Insulation
Crawlspace and basement runs in View Ridge sit in damp, cool air most of the year, which is exactly where condensation forms and rust starts. Proper insulation on those runs keeps the duct surface above the dew point, cuts heat loss, and protects the metal from the moisture that causes the corrosion we’re usually called out to repair.
Trusted Brands We Service in View Ridge
We work with the equipment and air-quality brands that hold up in this climate, including Nikro extraction systems, Abatement Technologies filtration, and Aprilaire and Honeywell air quality components. If your home has a brand-name furnace or air handler tied into the duct system, we can work with it. We don’t claim to stock parts or run a warehouse, but we source and install what the job needs and turn quotes around fast so you’re not waiting weeks to decide. One call covers the full system.

See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in View Ridge Homes
- Interior rust and pinhole leaks in original galvanized ducts. Decades of condensation in View Ridge crawlspaces corrode the metal from the inside, and those pinholes let damp crawlspace air into the supply stream.
- Disconnected or undersized return runs. Later furnace replacements often left the return side pulling from a crawlspace instead of the living area, which drags damp, debris-laden air straight into the system.
- Crushed flex duct behind drywall and at sharp turns. Remodel-era flex gets pinched where it turns, choking airflow to far rooms and giving debris a place to settle.
- Unpermitted furnace swaps that turned the system into a patchwork. Original 1950s trunk lines tied to newer flex without proper sizing or sealing are the norm here, not the exception.
Pricing for Duct Repair & Sealing in View Ridge, WA
Here’s what this work typically runs in View Ridge. Duct sealing on an accessible system is usually $450-$1,200 depending on how many joints need mastic and mesh. Metal duct repair, including patching pinholes and resecuring sections, generally falls between $350 and $900. Flex duct repair and reconnection runs $250-$700. Adding insulation to crawlspace runs is typically $400-$1,000. The bigger number is when a full duct-map and reconnect is needed across a patchwork system, which can reach $1,500-$2,500. Those ranges are estimates. The written estimate sets the final price, one flat price per system agreed before work starts, and the estimate itself is free. Call (833) 736-3635.
We Also Serve Cities Near View Ridge
We work across northeast Seattle, so if you’re just outside View Ridge we can still help. That includes Maple Leaf, Ravenna, Wedgwood, and Green Lake, all within a short drive and all dealing with much of the same mid-century housing stock. If your home is on the edge of the neighborhood, give us a call and we’ll confirm coverage before scheduling.
Serving View Ridge, WA – Our Local Coverage Area
We serve View Ridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in View Ridge
In most cases, yes. Original galvanized ductwork in View Ridge can be sealed and repaired rather than torn out, provided the metal hasn’t rusted through in large sections. We inspect the runs first, patch pinholes and resecuring loose joints with mastic and mesh, and only recommend replacement when the metal is structurally gone. Call (833) 736-3635 for an exact quote – estimates are free.
Because cleaning a patchwork system without fixing it just re-contaminates the ducts. During a camera inspection of a 1950s View Ridge ranch, a technician often finds a disconnected return in the crawlspace and crushed galvanized branches under an addition. The problem traces to a furnace upgrade that tied flex into the original metal trunk without proper sizing or sealing. The real fix is mapping the system, reconnecting and sealing accessible joints, then doing source removal under negative pressure with HEPA filtration. Call (833) 736-3635 to schedule that inspection.
Western Washington’s cool, humid marine air keeps crawlspaces and basements damp much of the year, which is hard on unsealed ducts. Dust that stays damp doesn’t just blow around, it feeds microbial growth inside the system. Sealing cuts off the path for that moisture to enter the supply stream and reduces condensation on the metal itself. Call (833) 736-3635 for a free estimate on sealing your View Ridge home.
Metal duct repair addresses the original galvanized trunk lines, including interior rust, pinholes, and loose joints. Flex duct repair handles the later added runs, which tend to get crushed, kinked, or disconnected. View Ridge homes almost always have both, and the right fix usually involves sealing the metal and reconnecting or replacing the flex in one visit. Call (833) 736-3635 to get both assessed together.
Yes. We work to NADCA standards for duct cleaning, which means source removal under negative pressure with HEPA filtration rather than a surface wipe-down. We use professional-grade Rotobrush and Nikro extraction systems and Abatement Technologies filtration on-site. Combining proper cleaning with sealing is what keeps the system clean afterward. Call (833) 736-3635 for a free estimate.
If your View Ridge home is running original metal ducts, disconnected returns, or a patchwork of retrofit flex, the fix starts with a proper map of the system. One call covers the full system: cleaning, sealing, sanitizing, and repair. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 736-3635 for a free estimate.
Written by the team at Air Duct Cleaning Queen Anne.